Dynamic
and Adaptive
Emergency Exit
Signs
THE
ATHENA
RANGE
Construction material : ABS/PC, PC
5 -year warranty
Produced in accordance with EN 60598-1, EN 60598-2-22, ΕΝ 55015, ΕΝ 61547, ΕΝ 61000-3-2, ΕΝ 61000-3-3..
Single sided use only.
Available self-contained with 2 x 6.4V / 1200mAh 3 hour back-up battery.
Specification
Self-contained dynamic LED light source, ABS/PC body suitable for use on smooth or rough wall surface types.
Materials
Trim: ABS/PC, PC – white
Legend panel: The user has the ability to change the screen icons by adjusting the switches located at positions DS1, DS2, and DS4.
DS1
Adjustment of the icons during the alarm operation of the luminaire. The user can select one of 16
different icons by using the switches of DS2. For more information regarding the alarm function,
please refer to the CONNECTIONS section. The switch settings are the same as those of DS1.
The user has the ability to change the screen icons by adjusting the switches located at positions DS1,
DS2, and DS4.
DS4
Adjustment of the icon mode (Static/Moving). The user can set the icon mode by using the switches of
DS4. When the switch is in the OFF position, the icons are static, while when the switch is in the ON
position, the icons are moving. Switch 1 is used for the normal operation of the luminaire while switch
2 is used for the alarm operation of the luminaire.
DS2
Adjustment of the icons during the normal operation of the luminaire. The user can select one of 16
different icons by using the switches of DS1. For the switch settings, please refer to the additional
leaflet included in the packaging
Battery (LiFePO)
2 x 6.4V / 1200mAh
Installation Notes
Can be installed onto rough or smooth walls via apertures in rear back box. The front fascia is secured by six fixing screws at recommended torque.
Fire alarm panel connectivity
The luminaire has the capability to connect to any control panel that can send an alarm signal. Once the
alarm is activated by the panel, the luminaire’s icons change according to the user’s selection from DS2.
For this function to work, it is necessary to connect the terminal block of the panel to the terminal block
of the luminaire at the C1 and C2 poles
System Mode (LED)
Maintained or Non Maintained
Housing
White as standard
Housing Options
Black – MOQ applies
The Athena is a surface mount IP20 rated maintained exit sign with conventional functionality plus extra performance.
The Arrow Directions or the use of a Red Cross can be changed by using micro switches in the board these can be static or animated.
- Six screws fittings for the base unit to allow easy access for installation & commissioning
- Suitable for indoor use in office and residential buildings, retail premises and hotels
- Complies with BS5266-1 and produced in accordance with EN 60598-1, EN 60598-2-22, ΕΝ 55015,ΕΝ 61547, ΕΝ 61000-3-2, ΕΝ 61000-3-3
REQUEST DATASHEET
Dimensions (mm) L277 x D150 x W56
EASY TO INSTALL
Can be installed onto rough or smooth walls via apertures in rear back box.
Legend Panel The user has the ability to change the screen icons by adjusting the switches located at positions DS1DS2, and DS4.